10 Years Warranty

Free shipping to US and Canada

After Sale Support

20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
  • Load image into Gallery viewer, 20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
  • Load image into Gallery viewer, 20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
  • Load image into Gallery viewer, 20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End
  • Load image into Gallery viewer, 20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End

20pcs 12x1.5 Black 45mm Extended Lug Nuts (1.8") for Tuner Racing Cone Seat Open End

$42.50
$42.50
Sold out
Tax included. Shipping calculated at checkout.
Quantity Set of 20 Lug Nuts
Thread Size 12x1.5
Type Tuner / Race Style
Seat Type Cone Seat
Nut Height 1.8" (45mm)
Hex Size 17mm
Material Steel (Heat Treated)
Color Black

 

FITMENT INFORMATION

These Lug Nuts can fit on vehicles with 12x1.5 | 12mmx1.5 | M12x1.5 | 12x1.5mm | UNF RH wheel studs

Before Purchasing
 Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size.
 Verify Seat Type - Wheel Lug Holes have a variety of seat types. It's impossible for us to know what you have. Therefore, it is the buyer's responsibility to verify the seat of this nut matches their wheels
 Verify Lug Nut Measurements - We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels.

Installation
 Professional Installation Recommended
 Be sure to torque the lug nuts to the vehicle manufacturer specifications
 Avoid using an impact wrench; improper usage may cause damage to components
 Check and re-torque after 25-50 miles of driving

  • Compatible with Acura. Compatible with Chevrolet Camaro Corvette S10 Blazer. Compatible with GMC Jimmy S15. Compatible with Honda Accord Civic. Compatible with Hyundai Veloster Tiburon. Compatible with Lexus IS GS. Compatible with Kia Optima. Compatible with Mazda Miata RX8. Compatible with Mitsubishi Eclipse Lancer. Compatible with Scion xB tC. Compatible with Toyota Avalon Camry Corolla. IMPORTANT to Verify Year & Model in Description. Vehicle Must Have M12x1.5 12x1.5mm Studs.

  • Total Length: 1.8" (45mm) | Thread Size & Pitch: 12x1.5 | Seat Type: Cone Seat | Color: Black | HEX SIZE: 17mm | STYLE: Tuner / Race Style Lug Nuts. See Diagram for Measurements.

  • SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels' lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.